Author's Area

THE 11TH INTERNATIONAL CONGRESS ON ULTRA MODERN TELECOMMUNICATIONS
AND CONTROL SYSTEMS

The aim of ICUMT is to bring together international players in telecommunications, robotics and control systems. The congress consists of two open call tracks, technical workshops, tutorials and industrial exhibitions. Prospective authors are invited to submit papers including technical novelties and tutorial overviews in the areas including but not limited to:

  • 3GPP Long-Term Evolution (LTE) and High Speed Uplink Packet Access (HSUPA)
  • Femto Cells
  • IMS and IMS-based services
  • Mobility, handoff protocols and management
  • Device-to-device communications
  • Next generation 802.11 and 802.15 including mesh, PAN, BAN, etc.
  • Ultra-wideband communications (UWB)
  • Underwater communications
  • Energy-efficient networking, circuits, devices and transmission technologies
  • Energy efficiency of data centers and intelligent cloud computing
  • Cross-layer optimizations to minimize energy consumption on a network scale
  • Cognitive, cooperative and reconfigurable networks
  • Protocols and protocol extensions for energy efficient networks
  • Network load balance and smart information storage
  • Remote power management for wireless terminals and access networks
  • Hierarchical and distributed techniques for energy managemen
  • Harvesting distributed energy generation
  • Smart Grid
  • Information theory on energy efficiency
  • Energy evaluation and comparison of different network technologies
  • Novel network concepts and architectures lowering the overall footprint of ICT
  • Estimation and evaluation of the worldwide footprint of ICT
  • Regulation and standardization
  • Deployment, trial experience, business models and applications
  • Cognitive Radio Networks and Systems
  • Spectrum sensing and spectrum management
  • Dynamic spectrum access
  • Cooperation and Game-Theoretical Protocols for Cognitive Radios
  • Software defined radio
  • Cross-Layer Protocol Design
  • Regulations and standards
  • Cooperative communications and networking
  • Multi-Carrier Systems & Solutions
  • MIMO and multi-antenna communications
  • Multi-carrier access schemes such as OFDMA, MC-CDMA, DFTS-OFDM, IFDMA, OFDM-IDMA
  • Cryptography
  • Coding for noisy channels and erasure channels
  • Source coding and data compression
  • Joint source-channel coding
  • Network coding and coding for multi-terminal systems
  • Cooperation, competition and cognition in wireless networks
  • Interoperability in IoT
  • Security and privacy issues in IoT
  • Industrial IoT
  • System architectures
  • Security in broadcast and multicast communications
  • Internet broadcasting
  • Mobile broadcasting and mobile TV
  • Emerging standards, e.g., DVB-S2, DVB-RCS, DVB-H, DVB-T, MediaFLO services and applications
  • RFID and Sensor Network Technologies
  • Architecture and platforms
  • Distributed and pervasive services
  • Personal and body networks, wearable computing
  • Semantic analysis
  • Business models
  • Digital Home Network Technologies
  • Vehicle-to-vehicle, vehicle-to-roadside communications
  • Intra-vehicle communications
  • Vehicle-to-Internet communications
  • Mobility and vehicular traffic models
  • Information collection and dissemination
  • Analytical and simulation techniques
  • Experimental systems and field operational testing
  • Safety and non-safety related applications
  • Recent standardization efforts and problems (e.g. 802.11p)
  • Overview of the activities and status of the ongoing projects
  • Deployment strategies and predictions
  • Advances in theoretical foundations of P2P
  • Security, trust and reputation in P2P
  • Performance analysis of P2P systems, applications and services
  • Quality of experience in P2P systems
  • Mobile P2P
  • P2P for sensors
  • Economic, business models and charging mechanisms in P2P
  • Legal and regulatory issues
  • Computational Aspects of Social Network
  • Applications
  • Network evolution and growth mechanisms
  • Network geography
  • Search in network
  • Security, data protection inside communities
  • Evaluation and benchmarking
  • Bio-inspired/Bio-oriented Networks
  • Body-area networks
  • Cryptocurrency technologies
  • Wireless telemedicine and E-health services
  • Location techniques and location-based services LBS
  • Broadband Satellite and HAPS (High Altitude Platform Station) Technologies
  • Information Security Technologies
  • Web Technologies
  • Multimedia & Internet Systems, Services and Standards
  • Mobile Internet, Internet Telephony (VoIP, MoIP) and IPTV
  • Network Management, Operation and Maintenance
  • Optical Networking Technologies and Applications
  • Open Programmable Networks and Active Networks
  • Communication Network Topology and Planning
  • User experience and usability studies in ICT
  • Systems & Software Engineering Aspects
  • GRID, Distributed Computing Technologies and Services
  • IT Services Technologies
  • Adaptive control
  • Robust control
  • Process control
  • Complex systems
  • Mechatronic systems
  • Co-operative control
  • Identification and estimation
  • Nonlinear systems
  • Intelligent systems
  • Hybrid systems
  • Networked control systems
  • Neural networks
  • Fuzzy systems
  • Genetic algorithms
  • Evolutionary computation and control
  • Precision motion control
  • Control applications
  • Control engineering education
  • Robot design, development and control
  • Human-robots interfaces
  • Mobile robots and autonomous systems
  • Human augmentation and shared control
  • Space and underwater robot
  • Telerobotics and Teleoperation
  • Industrial networks and automation
  • Multi-agent systems
  • Intelligent warehouses
  • Modeling, simulation and architectures
  • Vision, recognition and reconstruction
  • Virtual Reality
  • Control and supervision systems
  • Instrumentation systems
  • Biomedical instrumentation and applications
  • Web-based control
  • Autonomous agents
  • Petri nets

Manuscript and Presentation Guidlines

THE 11TH INTERNATIONAL CONGRESS ON ULTRA MODERN TELECOMMUNICATIONS
AND CONTROL SYSTEMS

Manuscript Template

Authors should prepare a PDF file following the IEEE single-space, two-column format using at least 10 point size type. The paper must be correctly formatted to fit on A4. The paper should not exceed 6 pages including figures, tables & references. Maximum 4 additional pages are allowed. Additional pages will be overcharged. The papers cannot exceed 10 pages, otherwise they will be automatically rejected. The cost of overcharge per page is indicated in the Registration Fees. The paper must be submitted in PDF format via the EDAS System.

Note: The congress organizers reserves the right to not include a paper to the Proceedings if the congress registration fee is not paid or if the paper is not presented on the ICUMT 2019 congress.

Presentation Guidelines

The duration of the presentation slot is 15 minutes/paper. We recommend to the speakers to reserve 12 minutes for the presentation itself and 3 minutes for questions from the audience. The language of the conference is English. Neither translation nor interpretation will be provided.

Equipment

For the oral presentations, the congress rooms will be equipped with data projector and laptop. For computer presentations we provide MS PowerPoint and PDF Acrobat Reader. Since using authors’ own computers often causes technical problems and breaks please do not plan to use your own laptop. Instead, please prepare your presentation in electronic form (MS Power Point, Adobe PDF) and arrive to the assigned session room 10 minutes before the start of your session to report to the Chairman and to copy your files to the presentation computer.

Final manuscript submission

ICUMT 2019 and associated workshops have been registered for use of IEEE PDF eXpress Plus. All ICUMT 2019 congress articles submitted for inclusion in the ICUMT 2019 Proceedings must adhere to the IEEE Xplore PDF specification for compatibility. IEEE PDF eXpress Plus is a free service to IEEE conferences, allowing their authors to make IEEE Xplore-compatible PDFs (Conversion function) or to check PDFs that authors have made themselves for IEEE Xplore compatibility (PDF Check function). If a final manuscript is not compliant with PDF eXpress Plus, it will not be included into the proceedings submitted to IEEE Xplore after the congress.

Please be aware that for the ICUMT 2019 and associated workshops at least one Regular/IEEE/Stu­dent registration before September 18, 2019 (to receive the Early Registration fee) per accepted paper is mandatory to include the paper in the proceedings of the congress and IEEE Xplore. If your paper is accepted for a workshop, at least workshop registration fee has to be paid. Full congress registration covers workshop papers as well. A paper without registered authors after October 5, 2019 will be withdrawn.

Steps for the final manuscript submission:

1. Verify that your paper is created using the congress templates – see above in Manuscript template. The PDF file should be prepared according to the IEEE PDF specification. The page numbers will be inserted by the congress proceedings producer. So please make sure not to number your pages. Do not insert any footers or headers. Do not use any PDF security features in submitted PDF files, i.e., they must be fully accessible and editable by the proceedings producer for numbering and other production purposes.

2. Proofread and check layout of manuscript (it is highly recommended that you do this BEFORE going to IEEE PDF eXpress Plus.)

3. Create IEEE PDF eXpress Plus account (see „Procedure for PDF eXpress Plus log in“ below)

4. Upload source file(s) for Conversion; and/or PDF(s) for Checking

5. Use IEEE PDF eXpress Plus to attain IEEE Xplore-compatible PDF(s). The site contains extensive instructions, resources, helpful hints, and access to technical support.

6. According to the IEEE policy the contact author of each paper accepted for presentation in the ICUMT 2019 congress has to fill in the IEEE Copyright Form. The online IEEE eCopyright form will be available in the EDAS. Note that without this document your paper cannot be submitted for indexing in the IEEE Xplore® database.

7. Submit the final, IEEE Xplore-compatible PDF(s) to the ICUMT 2019 via your EDAS profile. Please DO NOT change the file NAME i.e. its PIDxxxxxxx code generated by PDF eXpress Plus . Please note: uploading a paper to IEEE PDF eXpress Plus is not the same as submitting the paper to the congress. You will still need to upload the checked PDF with final manuscript and copyright form to EDAS.

Procedure for PDF eXpress Plus log in:

1. Go to IEEE PDF eXpress Plus Site: http://www.pdf-express.org/plus Conference ID: 45195XP

2. For each congress paper, click "Create New Title."

3. Create IEEE PDF eXpress Plus account (see „Procedure for PDF eXpress Plus log in“ below).

4. Enter identifying text for the paper (title is recommended but not required).

5. Click „Submit PDF for Checking“ or "Submit Source Files for Conversion."

6. Indicate platform, source file type (if applicable), click Browse and navigate to file, and click "Upload File". You will receive online and email confirmation of successful upload. If you have your final manuscript in LaTex you might need to upload archive including all support files like images etc.*

7. You will receive an email with your Checked PDF or IEEE PDF eXpress Plus-converted PDF attached. If you submitted a PDF for checking, the email will show if your file passed or failed.

IEEE PDF eXpress Plus converts the following file types to PDF:Rich Text Format, Freelance, (La)TeX (DVI and all support files required), PageMaker, FrameMaker, QuarkXpress, Word Pro, Microsoft Word, WordPerfect.

*For documents created in formats that do not embed source files, include all support files with the final manuscript in a folder. Put this folder in a compressed archive for submission. If it is possible to embed images in the source document, you should do so to avoid potential issues, such as missing graphics.

IMPORTANT: A DVI (DeVice Independent file) is required for LaTeX conversions, in addition to all associated image files. Make sure that your LaTeX system can output a DVI, otherwise it cannot be converted. Be sure also to check that your images are properly referenced, and that DVI can handle the image file types used (DVI does not handle some newer image types, such as *.png).

Disclaimer:

The organizers can leave out a paper from the final proceedings submitted to IEEE Xplore in case it is not presented on the congress or workshop.